Chrome Plated Short Link Chain Collar with Round Chain - 4.0 mm

Each of Sprenger collars is stamped with a brand name HS-Germany (HS-GERMAN INOX / HS-CUROGAN) on the rings, swivels and some additional places on certain products. This marking functions as a verification of brand recognition for each Sprenger product.

Moreover, all stainless steel pinch collars are labelled with an additional tag that is marked with a red dot. It also helps to differentiate a stainless steel collar from a chromed steel one at the first glance.

A chain collar (also called choke chain, control collar) generally consists of a chain and two rings attached to both ends.  It forms a loop that slips through itself to form a collar at one end.

No matter how you treat this tool, the chain collar is NOT suitable for:

• dogs under 6 months,
• short-nosed or thin-necked breeds,
• dogs left unattended.

Both prong and choke chain collars are generally made of metal chain material which tightens around a dog’s neck when the handler pulls or jerks back on the leash.

The choke chain is designed to control by tightening around your dogs neck. There is no way to control how much a choke chain can tighten, so it is possible to choke or strangle your dog with this kind of collar. It is also easy to cause injuries to the trachea, esophagus, the blood vessels around the eyes, neck sprains, nerve damage, fainting, and temporary paralysis.

Prong collars function similarly to choke collars, except they contain metal spikes on the inside that dig into and ‘pinch’ a dog’s neck if he pulls on the leash. However, the martingale controls how much tightening the collar can do, which reduces the chance for accidental injuries.

A chain collar is not meant to choke your dog. If it does, you are using it incorrectly.

When you use it properly, the collar sits high on your dog’s neck, just below the jaw. Thanks to this position, you draw your dog’s attention to you when applying only slight pressure. One quick jerk is enough to make the collar tighten just for a second and then return into a loose state when you release it.

How to measure your dog for the chain collar:

1. Measure 1) the largest part of your dog's head, and 2) the middle of his/her neck.
2. Determine the size of the collar you need using your dog’s head measurements if your dog's head is larger than his/her neck.
3. Determine the size of the collar you need using your dog’s neck measurements if his/her neck is larger than the head.
4. Now add 2" to to the above measurements (head or neck) for larger dogs and 1" to 1.5" for smaller dogs. This is the size collar you will need.

To put a chain collar on your dog, follow  these simple steps:

1. Hold one of the chain’s end rings and push the chain through the ring. You have now formed the straight chain into a loop circle with both end rings touching.
2. Put the collar in front of the dog so it looks like a horizontal 'P.' Place the resulting loop around your dog’s head.
3. Attach a leash to the ring that does not have the collar sliding through it.

When placed on your dog in this manner, pulling on the leash will cause the collar to tighten. When you relax the leash, the collar loosens.

If placed on your dog incorrectly, the links of the collar go from the leash through the other ring and then UNDER the dog's neck. If placed on your dog incorrectly, the collar will often not automatically loosen when you pull on the leash.

Be sure that you put the chain collar on your dog in the appropriate orientation. If you walk with the dog on your right, leash-end of the chain should hang from the left side of your dog’s neck. If your dog walks on your left, leash-end of the chain should hang from the right side of your dog’s neck.

Please, choose the collar according to the following factors:

• dog’s neck size
• dog’s weight
• dog’s fur color
• allergy to nickel.

You will find more information about each product on the product pages. If you are still not sure which collar to choose for your dog, ask our support manager or local trainer.

There are many reasons of the discoloration of your dog’s fur. One of the reasons is the dog’s allergy to nickel. As a solution, Sprenger offers the nickel free materials curogan and solid brass to provide these dogs with a comfortable alternative. However, the collar may stain dog’s fur without any apparent reason.

We are unfortunately not in the position to assure you that curogan collars will not cause fur discoloration. Curogan is 100% nickel-free and is less likely to stain fur than any other material. However, there are cases when dog’s fur got stained because of the curogan prong collar.

A stainless steel collar is less likely to rust. And here is why. Chromium and nickel are present throughout stainless steel, not just on the surface (compare - steel with chrome coating that can be easily damaged and result in rusting). Because of this, the microscopic layer will form itself anew, even when the steel is cut or scratched.